NFPA 80 Fire Doors and Other Opening
Protectives Exam With Actual Questions
& Verified Answers,Plus
Rationales/Expert Verified For
Guaranteed Pass /2026 /Latest
Update/Instant Download Pdf
1. What is the primary purpose of a fire door?
A. To provide a decorative entrance
B. To limit the spread of fire and smoke
C. To allow for faster evacuation
D. To support the building structure
B. To limit the spread of fire and smoke
Rationale: Fire doors are designed to contain fire and smoke
within a compartment, allowing safe evacuation and reducing
property damage.
2. How often must fire doors be inspected according to NFPA 80?
A. Monthly
B. Annually
C. Every 5 years
D. Only after installation
B. Annually
Rationale: NFPA 80 requires annual inspections of fire doors to
ensure they function correctly and meet code requirements.
,3. Which component of a fire door assembly helps ensure smoke
does not pass through the gap around the door?
A. Hinge
B. Smoke gasket
C. Door frame
D. Latch
B. Smoke gasket
Rationale: Smoke gaskets or seals are installed around the door
edges to limit smoke migration.
4. What is the minimum required clearance between a fire door
and the floor?
A. 1/8 inch
B. 1/4 inch
C. 1/2 inch
D. 3/4 inch
B. 1/4 inch
Rationale: NFPA 80 specifies a maximum clearance of 1/4 inch
to maintain fire and smoke protection while allowing proper
operation.
5. Fire doors must have labels indicating:
A. Manufacturer only
B. Fire protection rating and manufacturer
C. Installation date only
D. Color and material
B. Fire protection rating and manufacturer
Rationale: Labels identify the door's fire resistance rating,
listing agency, and manufacturer to ensure proper use.
6. What type of hardware is NOT permitted on a fire door if it
interferes with closing?
, A. Door closers
B. Decorative handles
C. Fire-rated hinges
D. Latching mechanisms
B. Decorative handles
Rationale: Hardware that impedes door operation can prevent
proper fire containment and is prohibited.
7. Which of the following is a required feature for a swinging fire
door?
A. Automatic hold-open device without release
B. Self-closing device
C. Lock without panic release
D. Push plate only
B. Self-closing device
Rationale: NFPA 80 requires self-closing devices to ensure doors
automatically close during a fire.
8. A fire door’s label is missing or damaged. What should be
done?
A. Replace the entire door
B. Inspect and reinstall a proper label
C. Ignore if the door functions
D. Apply paint to mark the door
B. Inspect and reinstall a proper label
Rationale: The fire door must have a listed label to verify
compliance; missing labels invalidate certification.
9. Which of these doors is considered a horizontal fire door?
A. Rolling steel door used in a shaft opening
B. Swinging wooden door in an office
C. Sliding closet door
Protectives Exam With Actual Questions
& Verified Answers,Plus
Rationales/Expert Verified For
Guaranteed Pass /2026 /Latest
Update/Instant Download Pdf
1. What is the primary purpose of a fire door?
A. To provide a decorative entrance
B. To limit the spread of fire and smoke
C. To allow for faster evacuation
D. To support the building structure
B. To limit the spread of fire and smoke
Rationale: Fire doors are designed to contain fire and smoke
within a compartment, allowing safe evacuation and reducing
property damage.
2. How often must fire doors be inspected according to NFPA 80?
A. Monthly
B. Annually
C. Every 5 years
D. Only after installation
B. Annually
Rationale: NFPA 80 requires annual inspections of fire doors to
ensure they function correctly and meet code requirements.
,3. Which component of a fire door assembly helps ensure smoke
does not pass through the gap around the door?
A. Hinge
B. Smoke gasket
C. Door frame
D. Latch
B. Smoke gasket
Rationale: Smoke gaskets or seals are installed around the door
edges to limit smoke migration.
4. What is the minimum required clearance between a fire door
and the floor?
A. 1/8 inch
B. 1/4 inch
C. 1/2 inch
D. 3/4 inch
B. 1/4 inch
Rationale: NFPA 80 specifies a maximum clearance of 1/4 inch
to maintain fire and smoke protection while allowing proper
operation.
5. Fire doors must have labels indicating:
A. Manufacturer only
B. Fire protection rating and manufacturer
C. Installation date only
D. Color and material
B. Fire protection rating and manufacturer
Rationale: Labels identify the door's fire resistance rating,
listing agency, and manufacturer to ensure proper use.
6. What type of hardware is NOT permitted on a fire door if it
interferes with closing?
, A. Door closers
B. Decorative handles
C. Fire-rated hinges
D. Latching mechanisms
B. Decorative handles
Rationale: Hardware that impedes door operation can prevent
proper fire containment and is prohibited.
7. Which of the following is a required feature for a swinging fire
door?
A. Automatic hold-open device without release
B. Self-closing device
C. Lock without panic release
D. Push plate only
B. Self-closing device
Rationale: NFPA 80 requires self-closing devices to ensure doors
automatically close during a fire.
8. A fire door’s label is missing or damaged. What should be
done?
A. Replace the entire door
B. Inspect and reinstall a proper label
C. Ignore if the door functions
D. Apply paint to mark the door
B. Inspect and reinstall a proper label
Rationale: The fire door must have a listed label to verify
compliance; missing labels invalidate certification.
9. Which of these doors is considered a horizontal fire door?
A. Rolling steel door used in a shaft opening
B. Swinging wooden door in an office
C. Sliding closet door
