WILLOW INPATIENT RX100 EXAM
QUESTIONS AND ANSWERS 100% PASS
Vanco IV. You will find and select the orderable record and let IMS for IVs select the product to
dispense - ANS You need to place an order for a dose of vancomycin, to be given
intravenously. What could you
type in the Place new orders field?
Intelligent Medication Selection for IVs. Causes only one choice to be found on the Preference
List. Since there is only one choice on the Preference List, Epic will select it for you (pulling it in
to the sidebar) and choose the correct product(s) to dispense based on the dose and what is
available in the dispensing pharmacy. - ANS When you enter the order for the vancomycin, it
is pulled right in to the Orders sidebar ( because there is only one option on the facility list) even
though it can be dispensed in many different ways. What is causing this to happen?
The pharmacists' Preference List tab contains common medication and non-medication orders.
The Facility List tab contains orders that are available at the patient's hospital. The Database tab
contains every single record from the third party data, including medication and non-medication
records. - ANS When a pharmacist places orders, what appears on the Preference List tab?
the Facility List tab? the Database tab
The Intelligent Medication Selection (IMS) functionality - ANS designed to select the best
product ﴾ERX﴿ or products based on the dose and what is available. IMS can create a "mixture"
of multiple ERX products as needed. To make the most of this functionality, do not include a
strength when searching for an IMS medication
Closest dispense location
Smallest number of different strengths in a dose
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
,Smallest total number of tablets, capsules or suppositories in a dose - ANS Intelligent
Medication Selection tries to find a combination of strengths for a single ingredient solid that
allows for the:
The Intelligent Package Selection (IPS) functionality. IPS can dispense multiples of a single NDC,
but will not combine different NDCs for a single
order. - ANS For liquid medications and changes the package ﴾NDC﴿ only, not the product
﴾ERX﴿.
an order can't be verified without a package. If a pharmacist enters an order without a package,
the order will not autoverify. - ANS Because NDCs are required by payers and CMS, and
because they can have such a large impact on how medications are dispensed and charged for
Reconcile Home Medications; in this section, providers determine whether the medication
should be Ordered, Not Ordered, Replaced, or Removed. - ANS In which section of the
medication reconciliation navigator does a provider decide whether a home med should be
ordered for this admission?
The medication was entered in Epic as an outpatient prescription. - ANS When reviewing the
patient's home medications, what does the house icon indicate?
The person icon indicates that the patient reported taking that medication. - ANS When
reviewing the patient's home medications, what does the person icon indicate?
Providers see medication and non-medication orders that are available for ordering at the
hospital the patient is admitted to. This is the same for pharmacists and other users, as well. -
ANS What do providers see on the Facility List? Is this the same or different from what
pharmacists see?
True. Orders that have been signed appear on the MAR (and Orders activity and Verify Orders),
but if they aren't verified yet a stop sign appears on the MAR and no dispense location appears -
ANS True or False: Nurses can tell if a medication has been verified from the MAR.
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, When the order is signed. If an order is signed & held, it appears when released. - ANS When
do medication orders appear on the MAR and in the Orders activity?
Any patients with signed (and released) orders needing verification appear on the Verify tab of
the Pharmacist Queue. Filters narrow down the patients you see, based on unit or other filter
options like Adult or Pediatric - ANS Which patients appear in the Verify Queue? How do
filters affect that?
Answers A (binoculars) and D (open i-Vent). A snowflake appears if new orders have been
placed since the last time a pharmacist looked at them (B) and a pencil appears if someone else
has the orders locked (C). - ANS You see an order in the Verify Queue, with a binoculars icon
and a yellow yield sign. What does
that mean? ﴾Choose ALL that apply﴿.
A. Someone has viewed the orders but not verified them, and closed the chart
B. There have been changes to the patient's orders since a pharmacist's last review
C. One of your colleagues is currently looking at the patient's orders
D. There is an open i-Vent for the order
There is a "Reordered from" link to the home medication. - ANS How can you identify a
reordered home medication when verifying orders?
False! No one is notified of these changes. This way of making a change should be limited to
changes that do not alter the intent of the order. - ANS True or False: When a pharmacist
makes changes in Verify Orders, the ordering provider is notified of the change.
If there is a modification to make which changes the intent of the order or that other clinicians
should be aware of. - ANS When should you use the Orders activity to modify or
discontinue/replace an order?
If the issue is unresolved, the open i-Vent will cause an icon to appear on the Pharmacist Verify
Queue (and in the patient's Storyboard and Medications activity) as a reminder. - ANS What
is the advantage of leaving an i-Vent open?
3 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
QUESTIONS AND ANSWERS 100% PASS
Vanco IV. You will find and select the orderable record and let IMS for IVs select the product to
dispense - ANS You need to place an order for a dose of vancomycin, to be given
intravenously. What could you
type in the Place new orders field?
Intelligent Medication Selection for IVs. Causes only one choice to be found on the Preference
List. Since there is only one choice on the Preference List, Epic will select it for you (pulling it in
to the sidebar) and choose the correct product(s) to dispense based on the dose and what is
available in the dispensing pharmacy. - ANS When you enter the order for the vancomycin, it
is pulled right in to the Orders sidebar ( because there is only one option on the facility list) even
though it can be dispensed in many different ways. What is causing this to happen?
The pharmacists' Preference List tab contains common medication and non-medication orders.
The Facility List tab contains orders that are available at the patient's hospital. The Database tab
contains every single record from the third party data, including medication and non-medication
records. - ANS When a pharmacist places orders, what appears on the Preference List tab?
the Facility List tab? the Database tab
The Intelligent Medication Selection (IMS) functionality - ANS designed to select the best
product ﴾ERX﴿ or products based on the dose and what is available. IMS can create a "mixture"
of multiple ERX products as needed. To make the most of this functionality, do not include a
strength when searching for an IMS medication
Closest dispense location
Smallest number of different strengths in a dose
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
,Smallest total number of tablets, capsules or suppositories in a dose - ANS Intelligent
Medication Selection tries to find a combination of strengths for a single ingredient solid that
allows for the:
The Intelligent Package Selection (IPS) functionality. IPS can dispense multiples of a single NDC,
but will not combine different NDCs for a single
order. - ANS For liquid medications and changes the package ﴾NDC﴿ only, not the product
﴾ERX﴿.
an order can't be verified without a package. If a pharmacist enters an order without a package,
the order will not autoverify. - ANS Because NDCs are required by payers and CMS, and
because they can have such a large impact on how medications are dispensed and charged for
Reconcile Home Medications; in this section, providers determine whether the medication
should be Ordered, Not Ordered, Replaced, or Removed. - ANS In which section of the
medication reconciliation navigator does a provider decide whether a home med should be
ordered for this admission?
The medication was entered in Epic as an outpatient prescription. - ANS When reviewing the
patient's home medications, what does the house icon indicate?
The person icon indicates that the patient reported taking that medication. - ANS When
reviewing the patient's home medications, what does the person icon indicate?
Providers see medication and non-medication orders that are available for ordering at the
hospital the patient is admitted to. This is the same for pharmacists and other users, as well. -
ANS What do providers see on the Facility List? Is this the same or different from what
pharmacists see?
True. Orders that have been signed appear on the MAR (and Orders activity and Verify Orders),
but if they aren't verified yet a stop sign appears on the MAR and no dispense location appears -
ANS True or False: Nurses can tell if a medication has been verified from the MAR.
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, When the order is signed. If an order is signed & held, it appears when released. - ANS When
do medication orders appear on the MAR and in the Orders activity?
Any patients with signed (and released) orders needing verification appear on the Verify tab of
the Pharmacist Queue. Filters narrow down the patients you see, based on unit or other filter
options like Adult or Pediatric - ANS Which patients appear in the Verify Queue? How do
filters affect that?
Answers A (binoculars) and D (open i-Vent). A snowflake appears if new orders have been
placed since the last time a pharmacist looked at them (B) and a pencil appears if someone else
has the orders locked (C). - ANS You see an order in the Verify Queue, with a binoculars icon
and a yellow yield sign. What does
that mean? ﴾Choose ALL that apply﴿.
A. Someone has viewed the orders but not verified them, and closed the chart
B. There have been changes to the patient's orders since a pharmacist's last review
C. One of your colleagues is currently looking at the patient's orders
D. There is an open i-Vent for the order
There is a "Reordered from" link to the home medication. - ANS How can you identify a
reordered home medication when verifying orders?
False! No one is notified of these changes. This way of making a change should be limited to
changes that do not alter the intent of the order. - ANS True or False: When a pharmacist
makes changes in Verify Orders, the ordering provider is notified of the change.
If there is a modification to make which changes the intent of the order or that other clinicians
should be aware of. - ANS When should you use the Orders activity to modify or
discontinue/replace an order?
If the issue is unresolved, the open i-Vent will cause an icon to appear on the Pharmacist Verify
Queue (and in the patient's Storyboard and Medications activity) as a reminder. - ANS What
is the advantage of leaving an i-Vent open?
3 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
