EXAM 955 MSS – TEST 3 EXAM (ACTUAL
EXAM) WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2026
What logic gate does the truth table depict?
A|B|Y
0|0|0
0|1|0
1|0|0
1 | 1 | 1 - ANSWERS-AND
If a Megger shows a change in reading what does this
mean? - ANSWERS-Future problems with the motor
In a PLC conveyor configuration, what supplies AC voltage to
the motor? - ANSWERS-Motor Driver
, What is the time required for a signal to move through a
logic circuit called? - ANSWERS-Propagation delay
What maximum size fuse should be used in a circuit with
4200W of power and 120VAC? - ANSWERS-30 Amps. A fuse
is a safety device; maximum safety listed for 35A is 30A
A class C fire extinguisher uses which component to
extinguish a fire? - ANSWERS-CO2
Before removing a blown fuse, what should be done? -
ANSWERS-Remove electricity
Two Technicians and One mechanic are assigned to work on
a circuit that must be de-energized; how many Iockouts are
required? - ANSWERS-3 (one for each person with one key
each)
A fuse gets hot while in a circuit. What can be the
underlying cause? - ANSWERS-Fuse clips have poor
connection or improper tension
EXAM) WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST ALREADY
GRADED A+ 2026
What logic gate does the truth table depict?
A|B|Y
0|0|0
0|1|0
1|0|0
1 | 1 | 1 - ANSWERS-AND
If a Megger shows a change in reading what does this
mean? - ANSWERS-Future problems with the motor
In a PLC conveyor configuration, what supplies AC voltage to
the motor? - ANSWERS-Motor Driver
, What is the time required for a signal to move through a
logic circuit called? - ANSWERS-Propagation delay
What maximum size fuse should be used in a circuit with
4200W of power and 120VAC? - ANSWERS-30 Amps. A fuse
is a safety device; maximum safety listed for 35A is 30A
A class C fire extinguisher uses which component to
extinguish a fire? - ANSWERS-CO2
Before removing a blown fuse, what should be done? -
ANSWERS-Remove electricity
Two Technicians and One mechanic are assigned to work on
a circuit that must be de-energized; how many Iockouts are
required? - ANSWERS-3 (one for each person with one key
each)
A fuse gets hot while in a circuit. What can be the
underlying cause? - ANSWERS-Fuse clips have poor
connection or improper tension
