1|Page
U1 UST Installation/Retrofitting Newest 2026-2027
Complete Questions And Correct Answers (Verified
Answers) |Already Graded A+|Brand New!!
1. What are the standard back fill materials for a fiberglass
tank. - ANSWER-A. pea gravel and crushed rock
B. pea gravel and dirt
C. pea gravel and water
D. sawdust and pea gravel
Answer A
2. Written Plans are required to - ANSWER-obtain permits,
solicit bids, and provide precise guidance for installers.
,2|Page
3. The plans should - ANSWER-Describe the property,
identify the size and location of the tanks, indicate the
liquids to be stored and provide the location of the
dispensers and piping.
4. Storage systems discussed in this recommended
practice are usually regulated by - ANSWER-Federal,
state or local agencies.
5. All owners should ensure that the equipment to be
installed meets - ANSWER-applicable regulatory
requirements before being installed
,3|Page
6. Consult the local authorities who have jurisdiction in the
area before storage-system plans are - ANSWER-finalized
or construction is initiated.
7. All owners should ensure that the equipment to be
installed meets all applicable regulatory requirements
before - ANSWER-Being installed.
8. To avoid damage tanks must not be - ANSWER-
dropped, dragged, or handled with sharp objects.
9. Tanks must not be dropped, dragged, or handled with
sharp objects to avoid - ANSWER-Damage to the tank
, 4|Page
10. The only time tanks really should be moved is when -
ANSWER-for inspections and testing.
11. If a tanks is damaged at all throughout the moving
process it must be - ANSWER-Repaired in accordance
with the manufacture's instructions.
12. The proper way to move a tank is by lifting it, using the
- ANSWER-Lift lugs that are installed by the manufacturer.
13. Tanks should be carefully lifted and lowered using -
ANSWER-Cables or chains of adequate length.
U1 UST Installation/Retrofitting Newest 2026-2027
Complete Questions And Correct Answers (Verified
Answers) |Already Graded A+|Brand New!!
1. What are the standard back fill materials for a fiberglass
tank. - ANSWER-A. pea gravel and crushed rock
B. pea gravel and dirt
C. pea gravel and water
D. sawdust and pea gravel
Answer A
2. Written Plans are required to - ANSWER-obtain permits,
solicit bids, and provide precise guidance for installers.
,2|Page
3. The plans should - ANSWER-Describe the property,
identify the size and location of the tanks, indicate the
liquids to be stored and provide the location of the
dispensers and piping.
4. Storage systems discussed in this recommended
practice are usually regulated by - ANSWER-Federal,
state or local agencies.
5. All owners should ensure that the equipment to be
installed meets - ANSWER-applicable regulatory
requirements before being installed
,3|Page
6. Consult the local authorities who have jurisdiction in the
area before storage-system plans are - ANSWER-finalized
or construction is initiated.
7. All owners should ensure that the equipment to be
installed meets all applicable regulatory requirements
before - ANSWER-Being installed.
8. To avoid damage tanks must not be - ANSWER-
dropped, dragged, or handled with sharp objects.
9. Tanks must not be dropped, dragged, or handled with
sharp objects to avoid - ANSWER-Damage to the tank
, 4|Page
10. The only time tanks really should be moved is when -
ANSWER-for inspections and testing.
11. If a tanks is damaged at all throughout the moving
process it must be - ANSWER-Repaired in accordance
with the manufacture's instructions.
12. The proper way to move a tank is by lifting it, using the
- ANSWER-Lift lugs that are installed by the manufacturer.
13. Tanks should be carefully lifted and lowered using -
ANSWER-Cables or chains of adequate length.
